How to Pick a Canoe Paddle

How to Choose a Canoe Paddle

“There’s magic in the feel of a paddle and the movement of a canoe, a magic compounded of distance, adventure, and solitude, and peace.”
—Sigurd Olson

 

A canoe paddle is your connection to the water – it controls your boat's direction and propels you to your destination. Learn about price, materials, size, grips, blades and more.

 

PRICE

A canoe paddle is a great place to invest extra money. Canoe paddle prices are typically based on materials and quality of craftsmanship.

Common paddle materials from most to least expensive:

  • Carbon Fiber $$$
  • Fiberglass & Wood $$
  • Aluminum Shafts $
  • Plastic Blades $

There are additional choices that affect the price of a canoe paddle.

Larger blades add to the price and bent shaft paddles generally cost 10% more than a straight shaft paddle.

For durability, quality wood blades are wrapped in fiberglass, and more economical wood paddles are coated with epoxy or varnish.

First Water Boats is a Bending Branches Paddles dealer. The world's largest manufacturer of quality canoe and kayak paddles, Bending Branches has been outfitting paddling enthusiasts for over 40 years

PADDLE SHAFTS

Straight Shaft

The most powerful part of the stroke is when the blade is vertical in the water, and your energy pulls the canoe forward. Near the beginning of the stroke, when the paddle is in front of the canoeist, a straight paddle blade will be vertical. As it moves through the stroke, the straight paddle will angle up and out of the water, slightly lifting it and making it less efficient.

Bozeman, Montana Canoe
It is easier to turn a canoe with a straight paddle when using corrective strokes or when using your paddle as a canoe rudder. 

Straight paddles are great for:

  • technical waters
  • stern paddlers
  • solo canoeists

    Bow paddlers also often prefer a straight paddle
    for its ease of use and intuitive turning.

    Bent Shaft

    A bent shaft paddle bends forward about 11 degrees where the shaft and blade meet (the logo usually faces the canoe's bow).

    The bent shaft extends the time when the canoe paddle is vertical in the water, producing more power throughout the stroke. That power peaks in the middle of the stroke when your top hand is level with your shoulder, reducing fatigue.
    However, turning a canoe is less intuitive with a bent shaft.

    Bending Branches Bent Shaft Canoe PaddleBent Shaft Canoe Paddle Blade
     Bent shaft canoe paddles are great for:
      • flat water
      • long trips
      • bow paddlers

    Stern paddlers often use bent shaft paddles too,
    especially when travelling long distances at speed on flat water.

    Shaft Material: 

    Every time a shaft flexes, it wastes energy. Every extra ounce adds up. The farther you go, the more you will appreciate a paddle with a high stiffness-to-weight ratio.

    Carbon fiber is by far the stiffest and lightest option. The higher price tag is worth it if you want to save energy and go fast. Carbon shafts are smooth and almost soft to the touch. Carbon fiber is also excellent against fatigue failure, so barring any impact, it will last a long time.

    Wood shafts are a durable and beautiful classic option, but the solid shaft is relatively heavy. Wood shafts are an excellent choice for recreational, youth, and expedition paddlers or someone looking for a paddle to last a long time.

    Carbon Fiber Canoe Shaft Wood Canoe Shaft
    Fiberglass shaft canoe paddles are stiffer and lighter than wood but heavier and more flexible than carbon.

    Aluminum shafts are impact-resistant and the most economical option. However, aluminum is the heaviest option and is prone to fatigue failure over time.

    BLADE

    Size

    The larger the surface area of a blade, the more water it is pushing against and, in turn, the more power you can generate with each stroke. That also means bigger blades are more tiring to use.

    Therefore, you see marathon and excursion paddlers with small blades using a high cadence. Yet whitewater canoeists and short-distance paddlers often use large blades. They rely on the large surface area to quickly generate a lot of power.

    Canoe Paddle Sugar Island Beaver Tail
    Shape

    A teardrop-shaped blade with square tips ("Sugar Island" profile) is more efficient for paddling. It is quiet and smooth at entry and exit. They have less surface area and, in turn, are less fatiguing.

    The advantage of the long "Beavertail" blade is its ability to steer and generate more power. As you turn your paddle to straighten the canoe, more blade is in the water to initiate the turn. This makes Beavertail paddles excellent for solo and stern canoeists. Remember that with the increased blade length, you need deeper water to get the whole blade below the surface, requiring more work per stroke. You will notice solo canoeists with a Beavertail paddle take long, slow strokes with an exaggerated turn at the end to keep the boat on course.

    MATERIAL

    Blade material choices are carbon fiber, wood, fiberglass, and plastic. Carbon fiber is again the lightest, most efficient, and most expensive option. Carbon fiber is prone to crack failure due to high impact. So, extra caution must be taken in rocky waters if you go with a carbon fiber blade. Don't push off of rocks with it to get away from shore. Carbon fiber blades dominate the market amongst racers and deep water users.

    Fiber Carbon Canoe Paddle Bending Branches Carbon Canoe Paddle
    Wood blades are beautiful. A wood blade will last a long time when properly wrapped with fiberglass and an edge guard. They are slightly heavier than carbon fiber. Fiberglass is again between wood and carbon fiber in durability, stiffness, and weight. Plastic blades are heavy, cheap, and durable. They also flex a lot, which wastes your energy and reduces responsiveness.

    GRIP

    Canoe Paddle Grips

    Two styles of canoe paddle grips dominate the canoe market. One in particular, the palm grip, sits comfortably in your hand for countless hours. The larger area distributes the pressure across your palm, allowing you to push the top of the paddle forward easily.
    On the contrary, you wrap your hand around the T-grip handle, making it easier to turn with the help of your thumb. Often, you will find these on whitewater paddles or those made for technical waters.

    LENGTH

    Paddle length is measured with the blade on the floor and the shaft vertical.  Paddle length is from the floor to the top of the handle.  There is no method to choose paddle length that works for everyone in every canoe.  Paddle length ultimately becomes a personal preference. 


    What are the signs of incorrect paddle length?


    If your canoe paddle is too short, you will be overreaching, or the paddle will skim the surface, and you will not get proper power. If it's shorter, the paddle will be submerged entirely throughout the entire stroke, efficiently wasting energy as you battle to keep it from wobbling at the start and end.

    Paddlers who travel long distances prefer to keep their top hand lower to reduce fatigue. Others who want a more powerful stroke will have a longer paddle where their top hand is higher, increasing their leverage.


    So what is the best length? It depends on two factors primarily. First is the length of your torso, and second is the distance from your canoe seat to the water line. 

    Method #1

    Ideally, the best way to measure would be to sit in your canoe while on the water and loaded with an average amount of weight, including other paddler(s).

    Straight Paddle

    You want your paddle fully submerged at the beginning of your stroke, where the blade is vertical. The blade will be slightly in front of you. When using a straight paddle, your top hand should be level with your nose.

    Bent Shaft Paddle

    The paddle should be fully submerged and vertical in the middle of your stroke with a bent shaft paddle. Your top hand should be level with your shoulder because you are further into your stroke. This shorter distance to reach results in a 4" shorter bent paddle being needed compared to a straight shaft. 

    Method #2

    If you can't get on the water, an estimate can be made by sitting in a chair and measuring the distance from the chair to your nose. Take this distance in inches and add 22" for a bent shaft and 26" for a straight paddle. Remember, the difficulty here is every canoe has different seat heights relative to the water line. It also depends on the weight of the paddlers and their gear. 


    Note: If you are using a beavertail blade, add 2-4" inches
    to accommodate the longer blade,
    which should be completely submerged
    when the blade is vertical in the water.

     

    Torso Length Bent Shaft Paddle Length Straight Paddle Length
    26" 26"+22"=48"  26"+26"=52"
    28" 50" 54"
    30" 52" 56"
    32" 54" 58"
    34" 56" 60"

     

    Photos Courtesy of Bending Branches
    This article was originally published 9/7/23. It has been updated.
    Back to blog

    Leave a comment

    Please note, comments need to be approved before they are published.